Application of 3D, 4D and 5D Building Information Modeling (BIM) in the Design of the Building Structure of the Archives Depot Building of the East Kutai Regency Secretariat
Abstract
This section consists of single paragraph and about 250 words maximum. For research articles, abstracts should give a pertinent overview of the work. We strongly encourage authors to use the following style of structured abstracts, but without headings: The development of digital technology in the construction industry has driven the adoption of Building Information Modeling (BIM) as an integrated approach in designing and managing building projects. However, the use of BIM, especially 3D, 4D, and 5D models, is still not optimal in non-metropolitan areas such as East Kutai Regency due to low technical understanding among construction service providers and users. This research aims to develop a BIM implementation model that is in accordance with local needs, especially in the design of government building structures. Using a qualitative approach based on case studies and meta-synthesis techniques on secondary data from the East Kutai Regency Secretariat Archives Depot Building project, this study integrates various BIM software such as Autodesk Revit, Proisac BIM 4D, and Sofistik Reinforcement to build a model that is able to represent geometric information, implementation schedules, and cost estimates simultaneously. The results show that the integration of 3D, 4D, and 5D BIM results in a more accurate, efficient, and can be used as a reference for replication in similar projects. In addition to answering local problems, this research makes a practical contribution to the preparation of a BIM implementation framework based on software interoperability, as well as expanding academic discourse on the application of BIM in the regional construction environment. The implications include the potential to increase the efficiency of public projects through the digitization of planning, while encouraging the strengthening of technical capacity and information technology-based procurement policies at the regional level.
References
Basir, W. N. F. W. A., Ujang, U., & Majid, Z. (2023). Adaptation 4D and 5D BIM for BIM/GIS data integration in construction project management. IOP Conference Series: Earth and Environmental Science, 1274(1), 012002. https://doi.org/10.1088/1755-1315/1274/1/012002
Chahrour, R., Hafeez, M. A., Ahmad, A. M., Sulieman, H. I., Dawood, H., Rodriguez-Trejo, S., Kassem, M., Naji, K. K., & Dawood, N. (2020). Cost-Benefit Analysis of BIM-Enabled Design Clash Detection and Resolution. Taylor & Francis: Construction Management and Economics, 39(1), 55–72. https://doi.org/10.1080/01446193.2020.1802768
Datta, S. D., Sobuz, M. H. R., Mim, N. J., & Nath, A. D. (2023). Investigation on the effectiveness of using building information modeling (BIM) tools in project management: A case study. Revista de la Construcción, 22(2), 306–317. https://doi.org/10.7764/rdlc.22.2.306
Ferry, F., & Indrastuti, I. (2020). Penerapan Building Information Modelling (BIM) pada Proyek Pembangunan Workshop (Studi Kasus: Proyek Pembangunan Workshop Kapal di Sekupang). Journal of Civil Engineering and Planning, 1(1), 7. https://doi.org/10.37253/jcep.v1i1.721
Government Regulation of the Republic of Indonesia. 2021. Cabinet Secretariat of the Republic of Indonesia. Government Regulation of the Republic of Indonesia Number 16 of 2021 concerning Implementation Regulations of Law Number 28 of 2002 concerning Buildings in Law Number 11 of 2020 concerning the Job Creation Law. Jakarta.
Jeong, H.-W. (2022). A study on the development of standardization for building process based on BIM. Journal of Pharmaceutical Negative Results, 13(S3), 447–456. https://doi.org/10.47750/pnr.2022.13.s03.094
Jing, W., & Alias, A. H. (2024). Key factors for BIM Implementation in the Context of ESG and SDGs Integration: A Systematic Literature Review. Preprint.Org. https://doi.org/10.20944/preprints202409.1536.v1
Kurcjusz, M., Krysińska, K., Kosakiewicz, M., Naliwajko, M., Jabłońska, Z., Radecka, K., Grzegorzewska, E., Sieczych, M., Ferenc-Pupek, E., & Stefańska, A. (2024). Integrating Building Information Modelling (BIM) into Construction: Innovetions, Challenges, and Global Perspectives. Acta Scientiarum Polonorum. Architectura, 23, 287– 303. https://doi.org/10.22630/ASPA.2024.23.22
Kurniawan, Y., & Suroso, A. (2023). Analisis Faktor-Faktor Building Information Modeling (BIM) Terhadap Tingkat Penerapan BIM dan Kinerja Proyek pada Proyek Design and Build. Journal of Syntax Literate, 8(7), 5353. https://doi.org/10.36418/syntax-literate.v8i7.13234
Lee, J.-H., & Kim, T.-Y. (2020). A measure for activating BIM by actual application analysis of integrated utilization process of quantity, process(4D), and construction cost(5D) in view of life-cycle. Journal of the Korea Society of Computer and Information, 25(12), 1–15. https://doi.org/10.9708/JKSCI.2020.25.12.001
Li, W., Li, S., Lin, Z., & Li, Q. (2021). Information Modeling of Mine Working Based on BIM Technology. Tunnelling and Underground Space Technology, 115(3), 103978. https://doi.org/10.1016/j.tust.2021.103978
Muhammad, H., Abbas, Q., Cheema, S. M., Faisal, M., & Shahzad. (2023). Effectiveness of 4D/5D scheduling in planning for delay reduction in construction projects. SJESR, 6(4), 7–15. https://doi.org/10.36902/sjesr-vol6-iss4- 2023(7-15)
Noviani, S. A., Amin, M., & Hardjomuldjadi, S. (2022). The Impact of 3D, 4D, and 5D Building Information Modeling for Reducing Claims to Service Providers. Sinergi International Journal of Accounting & Taxation, 26(1), 47–56. https://doi.org/10.22441/sinergi.2022.1.007
Pacheco, A., Pacheco-Pumaleque, L., Uri be-Hernández, Y., Mogrovejo, A., Pariona-Luque, R., Añaños-Bedriñana, M., Alvarez, A., Peñaranda, C., Pineda, F., Ruiz, M., & Felix-Poicon, E. (2024). Transforming construction management in Peru: The role of BIM in innovation and efficiency. SAGE Open, 14(1), 1–15. https://doi.org/10.1177/21582440241233401
Palensia, R. A., Kurniyaningrum, M., & Yusuf, M. (2024). Implementation of 5D Building Information Modelling (BIM) in Patimban Port Jetty Project. Indonesian Journal of Infrastructure and Civil Engineering, 10(1), 19–30
Patil, G. S., & Dwivedi, A. K. (2025). Building Performance Optimization Through BIM And Hybrid Metaheuristic Algorithms: A Fusion Of Artificial Bee Colony And Whale Optimization Techniques. International Journal of Environmental Sciences, 11(12s), 61–76. https://doi.org/10.64252/dsh8re09
Pomares, F. B., Funck, T., Feier, N. A., Roy, S., Daigle-Martel, A., Ceko, M., Narayanan, S., Araujo, D., Thiel, A., Stikov, N., Fitzcharles, M.-A., & Schweinhardt, P. (2017). Histological Underpinnings of Grey Matter Changes in Fibromyalgia Investigated Using Multimodal Brain Imaging. The Journal of Neuroscience, 37(5), 1090 –1101. https://doi.org/10.1523/JNEUROSCI.2619-16.2016
Saputra, T. H., Panjaitan, M., & Eswan, E. (2025). Penerapan Building Information Modeling (BIM) dalam Manajemen Konstruksi Aliran Sungai untuk Pengelolaan Banjir Studi Kasus Daerah Aliran Sungai (DAS) KIPP IKN (Ibu Kota Nusantara). Media Bina Ilmiah: Pendidikan, Penelitian, Olahraga, Teknologi, Seni, 19(10).
Sharma, P., Gupta, S., & Kumar, L. (2017). A critical appraisal of integrating 4D and 5D BIM into construction practice. International Journal of Civil Engineering and Technology, 8(4), 32–39.
Smith, P. V. (2014). BIM & The 5D Project Cost Manager. Procedia - Sosial and Behvioral Sciences, 119(1475–484). https://doi.org/10.1016/j.sbspro.2014.03.053
Soleh, I. M., & Saputro, C. D. (2023). Implementasi Building Information Modelling Level 5D pada Proyek Bangunan Air. Jurnal Karkasa, 9(2). https://doi.org/10.32531/jkar.v9i2.730
Zheng, Y., Zhang, Y., & Lin, J.-R. (2023). BIM Base Time Varying System Reliability Analysis for Buildings and infrastructures. Journal of Building Engineering, 76(3), 106958. https://doi.org/10.1016/j.jobe.2023.106958
